Err

Capteurs de force, capteurs de couple sur mesure, amplificateurs pour pont de jauges

Amplifiers for strain gages

Analogue strain gauge amplifier : AMP-CSV
Mounting in enclosure box ,2 versions: input and output cable, input by PCB connexion and output cable
Power voltage of the PCB : 8.5Vdc to 30.0Vdc
Signal output : 0- +/-10.0V_0-5.0V_2.5+/-2.5V_0-10.0V_5.0+/-5.0V
Precision on linearity: 0,02%
Bandwidth : 0-1000Hz
Analogue strain gauge amplifier with current output  : AMP-CSI
Mounting in enclosure box ,2 versions: input and output cable, input by PCB connexion and output cable
Power voltage of the amplifier : 9.5Vdc to 30.0Vdc
Signal output : 4-20mA _ 12+/-8mA with 3 wires
Precision on linearity: 0,02%
Bandwidth : 0-1000Hz
Analogue strain gauge amplifier with current output  : CSATEX 4-20
Mounting in metallic enclosure box: input and output cable with fittings.
Power voltage of the amplifier : 8.5Vdc to 28.0Vdc
Signal output : 4-20mA with 2 wires
Precision on linearity: 0,02%
Bandwidth : 0-1000Hz
N.B.: components an electrical connexions must be dealed carefully due to the specific ATEX standard and environment
Miniature Analogue strain gauge amplifier with programmable gain  : AMP-GP1
The miniature amplifier AMP-GP1 for strain gauge bridge can be programmed with : USB_PR_02

Mounting in polymer enclosure: input and output wires soldered onPCB 
Dimensions : 10mm x 12mm x 4,50mm
Operating temperature : -40°C...+130°C
Supply voltage : from 2,65 to 5,50 Vdc
Output voltage : from 2,65 to 5,50Vdc
Output setup Zero balance (unloaded) : 0 to 100%
Precision on linearity: 0,1%
Bandwidth min. : 0-10.000Hz